Assigning Basic Settings - Cisco Aironet AIR-AP1200 Hardware Installation Manual

Assigning Basic Settings

Step 5 Click Express Setup. The Express Setup screen appears.
Figure 3-3
Enter the configuration settings you obtained from your system administrator. The configurable settings
Step 6
include:
System Name— The system name, while not an essential setting, helps identify the access point on
•
your network. The system name appears in the titles of the management system pages.
Configuration Server Protocol—Click on the button that matches the network's method of IP
•
address assignment.
–
–
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
3-6
Express Setup Page
DHCP—IP addresses are automatically assigned by your network's DHCP server.
Static IP—The access point uses a static IP address that you enter in the IP address field.
Chapter 3 Configuring the Access Point for the First Time
Figure 3-3 shows the Express Setup page.
OL-4310-05