Assigning Basic Settings - Cisco Aironet 1240AG Series Hardware Installation Manual

Chapter 3 Configuring the Access Point for the First Time

Assigning Basic Settings

After you determine or assign the access point's IP address, you can browse to the access point's Express
Setup page and perform an initial configuration:
Open your web-browser.
Step 1
Note
Note
Enter the access point's IP address in the browser address line and press Enter. An Enter Network
Step 2
Password page displays.
Enter Cisco in the username field and advance to the Password field.
Step 3
Enter the case-sensitive password Cisco and press Enter. The Summary Status page displays.
Step 4
Figure 3-2
Figure 3-2
OL-7293-01
D r a f t 1 A - C I S C O C O N F I D E N T I A L
The access point web-browser interface is fully compatible with Microsoft Internet Explorer
version 6.0 on Windows 98 and 2000 platforms, and with Netscape version 7.0 on Windows 98,
Windows 2000, and Solaris platforms.
When using the access point browser interface, you should disable your browser pop-up blocker.
shows the Summary Status page.
Summary Status Page
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
Assigning Basic Settings
3-5