Using The Express Security Page - Cisco Aironet AIR-AP1200 Hardware Installation Manual

Chapter 3 Configuring the Access Point for the First Time

Using the Express Security Page

Follow these steps to create an SSID using the Express Security page:
Type the SSID in the SSID entry field. The SSID can contain up to 32 alphanumeric characters.
Step 1
Note
To broadcast the SSID in the bridge beacon, check the Broadcast SSID in Beacon check box. When you
Step 2
broadcast the SSID, devices that do not specify an SSID can associate to the bridge. This is a useful
option for an SSID used by guests or by client devices in a public space. If you do not broadcast the
SSID, client devices cannot associate to the bridge unless their SSID matches this SSID. Only one SSID
can be included in the bridge beacon.
(Optional) Check the Enable VLAN ID check box and enter a VLAN number (1 through 4095) to assign
Step 3
the SSID to a VLAN. You cannot assign an SSID to an existing VLAN.
(Optional) Check the Native VLAN check box to mark the VLAN as the native VLAN.
Step 4
Select the security setting for the SSID. The settings are listed in order of robustness, from No Security
Step 5
to WPA, which is the most secure setting.
•
•
Note
Step 6 Click Apply. The SSID appears in the SSID table at the bottom of the page.
OL-4310-05
These characters are not allowed in the SSID: ", /, \, ], +, tab, and a trailing space character.
If you select Static WEP Key, choose the key number and encryption key size and enter the
encryption key (10 hexadecimaldecimal characters for 40-bit keys or 26 hexadecimaldecimal
characters for 128-bit keys).
If you select EAP Authentication or WPA, enter the IP address and shared secret for the
authentication server on your network.
If you do not use VLANs on your wireless LAN, the security options that you can assign to
multiple SSIDs are limited. Refer to the Cisco IOS Software Configuration Guide for Cisco
Aironet Access Points for VLAN details.
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Configuring Basic Security Settings
3-13