Short-Haul Dual-Port 10 Ge Cx4 Interface Module - H3C LS-5500-28C-PWR-SI-OVS Installation Manual

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
Caution:
When installing or removing an optional interface module, pay attention to the following
points:
Do not use too much force in the operation, and do not touch the surface-mounted
components directly with your hands.
After removing an optional module, if no new module is to be installed, install the
filler panel as soon as possible to prevent dust and ensure the normal ventilation in
the switch.

3.5.2 Short-haul Dual-port 10 GE CX4 Interface Module

I. Appearance and front panel of a short-haul dual-port 10 GE CX4 interface
module
Figure 3-31 Appearance of a short-haul dual-port 10 GE CX4 interface module
Figure 3-32 Front panel of a short-haul dual-port 10 GE CX4 interface module
II. Installation and removal
The installation and removal procedure of CX4 interface modules is the same as that of
XFP interface modules. Refer to 3.5.1 III. Installation procedure and 3.5.1 IV. Removal
for it.
3-22
Chapter 3 Installing the Switch