Sfp Modules; Optional Interface Modules - H3C LS-5500-28C-PWR-SI-OVS Installation Manual

S5500-si complete series
Table of Contents

Advertisement

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches

1.5 SFP Modules

The S5500-28C-SI, S5500-52C-SI, S5500-28C-PWR-SI, and S5500-52C-PWR-SI all
provide four 1000Base-X SFP ports to connect pluggable modules, while the ,
S5500-20TP-SI provides twelve 1000Base-X SFP ports. All SFP modules are hot
swappable and optional. Therefore, networking is more flexible.
You can select required SFP modules from Table 1-8.
Table 1-8 SFP modules that the S5500-SI series support
SFP module
Note:
The S5500-SI series Ethernet switches support Gigabit SFP optical modules only.
The types of SFP modules may vary over time. Consult H3C marketing personnel or
technical support personnel to obtain the latest information about SFP modules.
For specifications of pluggable modules, refer to H3C Low End Series Ethernet
Switches Pluggable Modules Manual.

1.6 Optional Interface Modules

The S5500-SI series (excluding S5500-20TP-SI) provide two extended module slots on
the rear panel. You can select the following extended modules:
One-port 10 GE XFP interface module
Dual-port 10 GE XFP interface module
Short-haul dual-port 10GE CX4 module
Item
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
SFP-GE-LH40-SM1310
SFP-GE-LH40-SM1550
SFP-GE-LH70-SM1550
1-21
Chapter 1 Product Overview
Type

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents