Boot Menu - H3C LS-5500-28C-PWR-SI-OVS Installation Manual

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
Note:
The loading process of the Boot ROM software is the same as that of the host software,
except that during the Boot ROM loading process, you must enter the different digit
after entering the Boot Menu and the system gives somewhat different prompts. The
following text mainly describes the Boot ROM loading process.

5.2.1 Boot Menu

Starting......
Press Ctrl-B to enter Boot Menu... 2
Press <Ctrl + B>. The system displays:
Password :
Note:
To enter the Boot Menu, you must press <Ctrl+B> within two seconds after the
information "Press Ctrl-B to enter Boot Menu..." appears. Otherwise, the system starts
to decompress the program; and if you want to enter the Boot Menu at this time, you will
have to restart the switch.
Input the correct Boot ROM password (by default, no password is set on the switch).
The system enters the Boot Menu:
***********************************************************
*
* H3C S5500-SI BOOTROM, Version 117
*
***********************************************************
Copyright (c) 2004-2007 Hangzhou H3C Technologies Co.,Ltd.
Creation date : Apr 15 2007, 20:31:56
CPU Clock Speed : 264MHz
BUS Clock Speed : 33MHz
Memory Size : 128MB
Mac Address : 000fe2005502
5-2
Chapter 5 Boot ROM and Host Software Loading
*
*
*