Operating Precautions - FUTABA GY501 Instruction Manual

F S
OR AFETY
8
At linkage
When the rudder neutral position was changed by the linkage,
the rudder neutral position in the AVCS mode must always be
re-read before use.

Operating Precautions

Avoid sudden temperature changes.
Sudden temperature changes will cause the neutral position to
change. For example, in the winter, do not fly immediately after
removing the model from inside a heated car and in the summer, do
not fly immediately after removing the model from inside an air
conditioned car. Allow the model to stand for about 10 minutes and
turn on the power after the temperature inside the gyro has stabilized.
Also, if the gyro is exposed to direct sunlight or is mounted near the
engine, the temperature may change suddenly. Take suitable mea-
sures so that the gyro is not exposed to direct sunlight, etc.
Re-reading method:
Turn on the transmitter in the AVCS mode, then turn on the gyro .
Or quickly switch (interval of within 1 second) the remote gain channel
switch between the AVCS mode and Normal mode at least three
times with the transmitter in the ON state. This memorizes the new
rudder position inside the GY501.