FUTABA GY501 Instruction Manual page 33

A
SSEMBLY AND
34
5) Adjust the hovering and flight rudder effect using the transmitter's
D/R or AFR function.
(If necessary)
6) When you sense a difference in the rudder effect between the
AVCS and Normal modes, adjust using the GY501 rudder control
linkage.
7) Adjust the left and right pirouette stopping state by control delay
and tracking.
A
DJUSTMENT
- Do not adjust with the ATV function. If the ATV function is used,
trimming may change.
- Adjustment method
When the rudder effect in the AVCS is different from the rudder effect
in the Normal mode after adjustment was performed using the
transmitter's D/R or AFR function, adjust the difference using the
NCGx parameter.
(See page 40 for setting
method)
(See page 40 for setting
method)
(See page 41 for setting
method)