Using The Accessories - FUTABA FP-7UAF Instruction Manual

• Digital Proportional Frequencies (FOR U.S.A.)
• The frequency of Futaba digital proportional sets can be changed within their own band. There are 2 different bands for
you to choose from (27 MHz and 75 MHz.) Please see chart listed below for specific frequency and its intended use.
Please note there are specific frequencies allocated for aircraft only and surface only use.
•The frequency can be changed within the same BAND by using a precisely matched pair of Futaba crystals. However,
Futaba recommends that you return your system to our factory service department for frequency changing, as tuning
may be necessary for proper operation. Changing frequency from one band to another is NOT possible.
• Always change frequency flag when frequency is changed. The frequency flag is to be attached to the top of antenna
and the channel designation to the base. (See Drawing)
• It is illegal to change crystals on 75 MHz bands in the U.S.A.
• ANTENNA FREQUENCY FLAG
Attach the frequency flag to the flag holder
as shown in the figure.
• Frequency Channel No. Flag Color (FOR U.S.A.)

• USING THE ACCESSORIES

The flag can be attached
to, and removed from, the
antenna with one touch.
— 2 1 —