FUTABA FP-7UAF Instruction Manual page 10

• FUNCTION AND DATA SETTING
Function
ATV
ADJUSTABLE TRAVEL
VOLUME
This function adjusts the servo left
and right throws and is used in
linkage correction.
• The rate can be set for each chan-
nel.
• The left and right (up, down) rate
can be set.
• The rate setting range is 30% to
110%.
The rate can be switched with the
• D/R can be set for CH1 (aileron),
CH2 (elevator), and CH4 (rud-
der).
• D/R can be set for each direction
of the
With this feature you can select
which switch position you want
for high rate and low rate.
• The rate setting range is 30% to
110%.
•Related function COMBINATION
SWITCH.
Display
R/U: Right or up
L/D: Left or down
To D/R
8
P r e s s t h e [MODE SELECT]
Data setting
CH selection
Select the CH to which ATV is
to be applied with the
keys.
Direction selection
Select the Direction with the
The rate described below is set
Rate setting
Set the rate with the
keys. (When the + and
— keys are pressed simultaneous-
ly, 100% is set.)
Set for a different CH and direction by re-
peating steps
Select the CH for which D/R is
to be set with the
keys.
D/R switch direction selection
Switch to the
which the
be set.
Set the rate with the
keys. (When the + and
— keys are pressed simultaneous-
ly. 100% is set.)
Set for a different CH and
direction by repeating steps
To normal display mod*
, or
direction for
is to
to