Swsh 2 - FUTABA 6XA Instruction Manual

Use the reversing function (REV) as necessary to get the proper aileron, elevator, and pitch
operations.
Choosing the swashplate type
1. Press on the
MODE
2. Select the desired swashplate type by pressing the (+) or (–) keys. At
this time, the selected type will blink on and off.
3. Press the
CURSOR
4. Press both the (+) and (–)
that the selected type is now the active one.
Inputting AFR rate Values
5. Use the
CURSOR
wish to change the AFR rate. The active channel number is indicated by
the arrow below. In the figure, AFR rate of SWSH2 type is being
programmed.
6. Choose the amount of AFR rate with the (+) or (–) keys. If you wish to return to the original
50% value, press both keys simultaneously.
7. Repeat this procedure for the AFR rate settings on the other channel remaining.
Aileron
buttons until appears on the menu.
SWSH
key, and the word SET? appears blinking on and off in the display.
keys at the same time. A beep-beep sound indicates
DATA INPUT
key to select the channel (aileron, elevator or pitch) you

SWSH 2

Elevator
Front
120
120
120
Pitch
SWSH 3 SWSH 3E
– 56 –