Flow Chart (Heli) - FUTABA 6EX-2.4GHZ Instruction Manual

To enter or leave Programming Mode,
press MODE and SELECT keys
simultaneously for one second.
(press MODE and SELECT keys for one second)
MODE
key
Simultaneously press the "MODE" and "SELECT" keys and hold them down for one second to enter the programming
mode. Press the keys again (or turn off the transmitter) to exit the programming mode.
FLOW CHART HELI MODE FUNCTIONS
(Screen at Startup)
[Model 2-5]
*1
[CH 2-5]
[CH 2-5]
[CH 2-3]
[2-4]
[2-4]
[2-4]
*1
[2-4]
*1
*1
*1
*1
*2
MODE key
SELECT key
DATA INPUT
lever
*1. Press the DATA INPUT lever
for 0.5 seconds
*2. Press the DATA INPUT lever
for about two seconds
32
Stick Mode
To change the Stick Mode, turn
on the transmitter and hold the
MODE and SELECT keys down
simultaneously.
Use the DATA INPUT lever to display
the desired stick mode.