Assembly / Adjustment; Receiver And Servo Connection - FUTABA 2PC Instruction Manual

2PC / 2PCKA

Receiver And Servo Connection

As you connect the receiver, servo's and other components, do so in accordance with the
"Assembly Precautions" listed on the next page.
Connections when a E.S.C. MC210CB or MC310CB are used.
E.S.C.
FP-R122JE
AM 2 CHANNEL RECEIVER
X'TAL
Receiver
Gas Powered Model
FP-R122JE
AM 2 CHANNEL RECEIVER
X'TAL
Receiver
To Receiver
Power Switch
Battery
Connect the battery in accordance with instructions provided with model you are
installing this system in.
Use the R2-BSS-N battery holder (Supplied with systems sold with 2 servos only)
to match your application.
If your model has a mechanical type speed control (Servo Driven for electric powered
models) inspect this component for a power supply regulator or voltage dropping Diode.
These device's will cause a voltage drop to the receiver. Be sure to remove them prior
to installation in your model.

Assembly / Adjustment

B E C
(CH2)
CH.2
CH.1
(CH1)
BATT
(CH2)
E
B C
CH.2
CH.1
BATT
(CH1)
(BATT)
Connects to Motor
Connects to battery
Power Switch
Steering Servo
Throttle Servo
Steering Servo