Connecting Cintiq21Ux - Wacom DTZ-2100D User Manual

Connecting Cintiq21UX

Turn off both your computer and the product.
1
Connect the DVI-I connector to your computer's display port.
2
Use either a DVI – DVI adapter or DVI – RGB adapter, depending on which is appropriate for your com-
puter's display port. Connect the adapter securely to your computer port.
Set the DVI / analog RGB switch.
3
If you used a DVI – DVI adapter in step 2, set the switch to DIGITAL; if you used a DVI – RGB adapter,
set the switch to ANALOG.
Connect the power adapter to the power cable and connect the DC power connector to the
4
DC power input terminal. Next, plug the power cable into your electrical outlet.
Be sure to also connect a ground wire.
Turn on the product's power switch.
5
The power indicator lamp will light up orange.
Turn on your computer.
6
While looking at the LCD screen, configure the colour resolution and size settings.
7
- Do not modify the refresh rate. Setting the rate to a value that exceeds the Cintiq21UX
refresh rate may result in loss of picture.
- The color palette settings and corresponding number of colors displayed are as
follows:
High Color (16 bit) → 65,536 colors / True Color (24 bit) → Roughly 1,677 colors
* The number of colors is limited by the efficiency of your computer and video card. For
details, refer to the user's manual provided by the manufacturers.
Connect the unit's USB connector to the USB port of your computer.
8
Install the tablet driver (Please refer to "Installing the Tablet Driver" on page 12).
9
10