The Status - System Performance Tab - Linksys WAP54GPE - Wireless-G Exterior Access Point User Manual

Wireless-G Exterior Access Point

The Status - System Performance Tab

The System Performance screen displays the Access Point's status information for its current settings and
data transmissions.
System Performance
Wired
Name. This indicates that the statistics are for the wired network, the LAN.
IP Address. The Access Point's local IP address is displayed here.
MAC Address. This shows the MAC Address of the Access Point's wired interface.
Connection. This shows the status of the Access Point's connection for the wired network.
Packets Received. This shows the number of packets received.
Packets Sent. This shows the number of packets sent.
Bytes Received. This shows the number of bytes received.
Bytes Sent. This shows the number of bytes sent.
Error Packets Received. This shows the number of error packets received.
Drop Received Packets. This shows the number of packets being dropped after they were received.
Management
Wireless
Name. This indicates the wireless network/SSID to which the statistics refer.
IP Address. The Access Point's local IP address is displayed here.
MAC Address. This shows the MAC Address of the Access Point's wireless interface.
Connection. This shows the status of the Access Point's wireless networks. They are either Enabled or
Disabled.
Packets Received. This shows the number of packets received for each wireless network.
Chapter 6: Configuring the Wireless-G Exterior Access Point
41
The Status - System Performance Tab