Figure 3-6: Radio Coverage Of The Access Point To Client Devices - Linksys WAP54GPE - Wireless-G Exterior Access Point User Manual

Wireless-G Exterior Access Point

Figure 3-6: Radio Coverage of the Access Point to Client Devices

When using the Access Point to connect client devices, adjust it so the client devices are on the same
horizontal plane as the Access Point and within a 3dB angle of 47 degrees. This will ensure the strongest
signal and maximum reach.
If the Access Point is used inside a building, put it in a corner of the building for maximum coverage.
Chapter 3: Getting to Know the Wireless-G Exterior Access Point
10
The Antenna Pattern