The Administration - Log Tab; Figure 6-18: Site Survey - Linksys WAP54GPE - Wireless-G Exterior Access Point User Manual

Wireless-G Exterior Access Point

The Administration - Log Tab

On this screen you can configure the log settings and alerts of particular events.
Log
You can have logs that keep track of the Access Point's activities.
Email Alert
E-Mail Alert. If you want the Access Point to send e-mail alerts in the event of certain attacks, select
Enabled. The default is Disabled.
E-Mail Address for Logs. Enter the e-mail address that will receive logs.

Figure 6-18: Site Survey

Notification Queue Length
Log Queue Length. You can designate the length of the log that will be e-mailed to you. The default is 20
entries.
Log Time Threshold. You can designate how often the log will be emailed to you. The default is 600
seconds (10 minutes).
Syslog Notification
Syslog is a standard protocol used to capture information about network activity. The Access Point supports
this protocol and send its activity logs to an external server. To enable Syslog, select Enabled. The default is
Disabled.
Syslog Server IP Address. Enter the IP address of the Syslog server. In addition to the standard event log,
the Access Point can send a detailed log to an external Syslog server. The Access Point's Syslog captures all
log activities and includes this information about all data transmissions: every connection source and
destination IP address, IP server, and number of bytes transferred.
Log
Select the events that you want the Access Point to keep a log.
Unauthorized Login Attempt. If you want to receive alert logs about any unauthorized login attempts, click
the checkbox.
Chapter 6: Configuring the Wireless-G Exterior Access Point
34
The Administration - Log Tab