The Status - System Performance Tab; Figure 6-27: Status - System Performance - Linksys WAP54GP User Manual

Wireless-G Access Point with Power Over Ethernet

The Status - System Performance Tab

The System Performance screen displays the Access Point's status information for its current settings and data
transmissions.
System Performance
Wired
Name. This indicates that the statistics are for the wired network, the LAN.
IP Address. The Access Point's local IP address is displayed here.
MAC Address. This shows the MAC Address of the Access Point's wired interface.
Connection. This shows the status of the Access Point's connection for the wired network.
Packets Received. This shows the number of packets received.
Packets Sent. This shows the number of packets sent.
Bytes Received. This shows the number of bytes received.
Bytes Sent. This shows the number of bytes sent.
Error Packets Received. This shows the number of error packets received.
Drop Received Packets. This shows the number of packets being dropped after they were received.

Figure 6-27: Status - System Performance

Wireless
Name. This indicates the wireless network/SSID to which the statistics refer.
IP Address. The Access Point's local IP address is displayed here.
MAC Address. This shows the MAC Address of the Access Point's wireless interface.
Connection. This shows the status of the Access Point's wireless networks. They are either Enabled or
Disabled.
Packets Received. This shows the number of packets received for each wireless network.
Chapter 6: Configuring the Wireless-G Access Point with Power Over Ethernet 37
The Status - System Performance Tab