The Administration - Log Tab; Figure 7-23: Administration - Log Screen; Figure 7-24: View Log Screen - Linksys WAP54G User Manual

Wireless-G Access Point

The Administration - Log Tab

On this screen you can configure the log settings.
Management
You can have logs that keep track of the Access Point's activities.
Log
To enable the Log support feature, select Enabled. Otherwise, select Disabled.

Figure 7-23: Administration - Log Screen

Logviewer IP Address. If you have chosen to monitor the Access Point's traffic, then you can designate a PC that
will receive permanent log files periodically. In the field provided, enter the IP address of this PC. To view these
permanent logs, you must use Logviewer software, which can be downloaded free of charge from
www.linksys.com.
View Log. To see a temporary log of the Access Point's most recent activities, click this button.
On the View Log screen, click the First Page button to see the first page of log entries. Click the Last Page button
to see the last page of log entries. Click the Previous Page button to see the previous page of log entries, and
click the Next Page button to see the next page of log entries. To delete all log entries, click the Clear Log
button. To update the log with the most recent activities, click the Refresh button.

Figure 7-24: View Log Screen

Change these settings as described here and click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. Click Help for more information.
Chapter 7: Configuring the Wireless-G Access Point 53
The Administration - Log Tab