Setting The Network-Access Parameters; Accessing The Network Through The Embedded Ppp Dial-Up Software On The Device - Huawei HG530 User Manual

3 Setting the Network-Access
Parameters
By configuring the HG530 and your computer, you can choose any of the
following methods to surf the Internet:
Accessing the Network Through the Embedded PPP Dial-Up Software on
the HG530
Accessing the Network Through the PPP Dial-Up Software on Your
Computer
3.1 Accessing the Network Through the
Embedded PPP Dial-Up Software on the
Device
If you select this method for accessing the network, the HG530 starts to set up
a dial-up connection automatically after the startup. You can access the
network after you power on your computer. You do not need to install any
special dial-up software on your computer or perform dial-up operations on
your computer. To configure the HG530 and your computer for the network
access, do as follows:
1. Log in to the Web-based configuration utility of the HG530.
1) Launch the Internet Explorer on your computer.
2) Enter 192.168.1.1 in the address bar, and then press Enter.
3) In the displayed dialog box, enter the user name and the password, and
then click OK.
By default, the user name is admin and the password is admin. After the
user name and the password are verified, you can access the Web-based
configuration utility.
2. Enable the embedded dial-up function.
1) In the navigation tree on the left of the Web-based configuration utility,
choose Basic > WAN Setting.
6