Setting Network Access Parameters; Configuring A Dial-Up Connection For Internet Access - Huawei HG630 Quick Start Manual

1. Telephone wall jack
4. Desktop computer
7. HG630
a. Splitter LINE port
3 Powering On the HG630
After you connect the cables, power on the HG630 by pressing the On/Off button on its side
panel.
After you power on the HG630, the Power indicator lights up,the DSL indicator lights up and
starts blinking, indicating that the DSL port is being activated. The blinking may last from 40
seconds to 3 minutes. When the DSL indicator stops blinking and turns steady on, it indicates
that the cables are connected correctly and the HG630 has been activated using DSL.

4 Setting Network Access Parameters

Configuring a Dial-Up Connection for Internet Access

By default, the HG630 works in routing mode. The HG630 starts to set up a dial-up
connection automatically after you power it on. You do not need to install any dial-up
software or perform any dial-up operations on your computer.
To set up a dial-up connection for Internet access:
Step 1 Launch a browser on your computer. Enter http://192.168.1.1 in the address box,
and press Enter.
Step 2 On the login page, enter your user name and password.
 By default, the user name is user and password is HuaweiUser.
 For security reasons or to make the password easy to remember, you can
change the user name and password for login. For details, check the HG630
user guide.
 If the user name and password have been changed, use the new ones to log in.
Step 3 Click Login.
Step 4 Click Setup Wizard to display the Wizard tab.
Step 5 Click Next.
Step 6 In WAN device, select your ADSL or VDSL WAN device.
Step 7 In User name and Password, enter the user name and password that are provided by
your service provider, and then click Next.
Step 8 In SSID and WPA pre-shared key, set a wireless network name and password, and
then click Next.
2. Splitter
5. Power adapter
b. Splitter PHONE port
2
3. Telephone
6. Laptop computer
c. Splitter MODEM port