Changing Audio Settings - Panasonic BL-C111A - Network Camera - Pan Operating Instructions Manual

5.6 Changing Audio Settings

5.6 Changing Audio Settings
The [Audio] page of the [Setup] tab allows you to adjust audio feature-related settings.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [Audio].
3.
Under [Input], select whether the camera's built-in microphone is enabled or disabled.
4.
Under [Camera Microphone Sensitivity], select the desired setting.
–
[Minimum]: Sets the microphone to minimum sensitivity. Less sound is picked up by the microphone.
–
[Standard]: Sets the microphone to standard sensitivity.
–
[Maximum]: Sets the microphone to maximum sensitivity. More sound is picked up by the microphone.
5.
Under [Mute during Pan/Tilt], select whether the camera's built-in microphone is automatically muted when
the camera is panning or tilting.
•
This feature is disabled by default.
•
When this feature is set to [Disable], the microphone will be enabled when the camera pans or tilts.
The sound of the lens moving may be picked up by the microphone.
6.
Click [Save].
98 Operating Instructions