Registering And Changing Presets - Panasonic BL-C111A - Network Camera - Pan Operating Instructions Manual

1.2.8 Registering and Changing Presets

1.2.8 Registering and Changing Presets
Presets allow you to easily aim the camera lens in the desired direction. The following presets can be registered:
•
Home position (the direction that the lens moves to when you turn the camera on or click the center
navigator button)
•
Sensor position
•
Presets 1–8
Additionally, the first 4 presets are set by default.
•
1: Upper Left
•
2: Upper Right
•
3: Lower Left
•
4: Lower Right
Viewing a preset
You can move the lens to a preset position in the following ways:
•
Click the center navigator button (to move the lens to the home position)
•
Click [Preset] and select a preset from the pull-down menu
•
Click a blue preset button (1–8) (Unregistered preset buttons are displayed in white.)
Registering or changing a preset
Note
•
This feature is available to the camera administrator only.
1.
Confirm that you are logged in to the camera as the administrator.
2.
Click [Program].
3.
Aim the camera in the desired direction.
4.
Adjust the brightness and white balance settings if desired. The brightness and white balance settings will
be registered to the preset.
5.
Under [Preset Number], select the desired preset from the pull-down menu.
6.
Enter a name for the preset (max. 15 characters).
•
You cannot rename the home position or sensor position.
•
See Page 147 for a list of valid characters. Note that [Space], ["], ['], [&], [<] and [>] cannot be used.
7.
Click [Save] to register the preset, or click [Back] to cancel.
•
When [Success!] is displayed, click [Back] to continue.
Deleting a preset
Note
•
This feature is available to the camera administrator only.
1.
Confirm that you are logged in to the camera as the administrator.
2.
Click [Program].
3.
Under [Preset Number], select the desired preset from the pull-down menu.
•
You cannot delete the home position or sensor position.
4.
Click [Delete] to delete the preset, or click [Back] to cancel.
•
When [Success!] is displayed, click [Back] to continue.
22 Operating Instructions