TECHNICAL GUIDE
Installation positions • Lubrication points • Remarks
Reassembly (3)
Reassemble the wheels and
train wheel bridge.
8
❇ Install the parts in the number order shown in the illustration below,
paying attention to the following:
mounting positions,
direction of mounting,
type of oil, lubrication point(s) and amount of lubrication.
normal quantity
1 Rotor stator
2 Rotor stator
3 Coil block
4 Coil block
5 Center wheel and pinion (AO-3)
6 Intermediate date driving wheel B
7 Setting wheel
8 Minute wheel and pinion
9 Battery connection (-)
10 Rotor
11 Rotor
12 Fifth wheel and pinion
13 Intermediate date driving wheel A
14 Third wheel and pinion
Cal. 6A32A