Seiko 6A32 Parts Catalogue /Technical Manual page 13

TECHNICAL GUIDE
Installation positions • Lubrication points • Remarks
Reassembly (8)
Reassemble the wheels on the back side
Note 1
24-hour wheel
CAUTION!
Make sure that the 24-hour wheel is set in the
correct direction.
Ensure that the flattened side is positioned properly
as shown in the illustration.
• When mounting the plastic parts, carefully check
that the teeth of the wheels and pinions are properly
engaged before setting the parts.
• Use a pair of tweezers to securely hold the plastic
parts, paying attention so as not to damage the
teeth or pinions.
1 Intermediate date driving wheel C
2 Date driving wheel
Pinion of the intermediate date driving wheel B
3 Hour wheel
4 24-hour wheel
Refer to the Note 1 below.
5 Intermediate 24-hour wheel
6 Date dial
Cal. 6A32A
13