Mounting The Base Plate On A Countertop - IBM 4851 514 Planning, Installation And Service Manual

Mounting the SurePOS 500 Model 514
Before mounting your system, first install any internal and external devices on the
unit. See "Installing the optional features" on page 6 for your installation
configuration requirements.

Mounting the base plate on a countertop

You can mount the SurePOS 500 Series free-standing base plate to a countertop
with two or four mounting screws. If you are routing the cables under the counter,
you can use the base plate as a pattern to cut out your counter or use the specific
mounting hole and cutout dimensions as shown in Figure 13 on page 21.
20
SurePOS 500 Model 514
Table 5. Mounting configurations (continued)
You can also mount the Model
514 to the optional mounting foot
and place on a cash drawer, see
"Mounting foot- removal and
replacement" on page 79.
Updated October, 2008