Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book page 302

If you write an assembly language program, use the two instructions below from the CATALOG to
identify and compile the program.
Instructions
AsmComp(prgmASM1,
prgmASM2)
AsmPrgm
To compile an assembly program that you have written:
1. Follow the steps for writing a program (16-4) but be sure to include
your program.
2. From the home screen, press y N and then select
3. Press  to display the
4. Select the program you want to compile. It will be pasted to the home screen.
5. Press ¢ and then select
6. Key in the name you have chosen for the output program.
This name must be unique — not a copy of an existing program name.
Note:
7. Press ¤ to complete the sequence.
The sequence of the arguments should be as follows:
AsmComp(prgmASM1, prgmASM2
8. Press Í to compile your program and generate the output program.
Comments
Compiles an assembly language program written in
ASCII and stores the hex version
Identifies an assembly language program; must be
entered as the first line of an assembly language
program
menu.
PRGM EXEC
from the
prgm CATALOG
)
AsmPrgm
to paste it to the screen.
AsmComp(
.
Chapter 16: Programming
as the first line of
295