Receiving Items - Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book

3. Press y 8 on the sending TI-84 Plus to display the
4. Select the menu of the items you want to transmit.
5. Press ~ on the sending TI-84 Plus to display the
6. Confirm that the receiving unit is set to receive.
7. Press Í on the sending TI-84 Plus to select

Receiving Items

LINK RECEIVE Menu
To display the
LINK RECEIVE
SEND RECEIVE
Sets unit to receive data transmission.
1: Receive
Receiving Unit
When you select
1:Receive
and the busy indicator are displayed. The receiving unit is ready to receive transmitted
Waiting...
items. To exit the receive mode without receiving items, press É, and then select
menu.
Error in Xmit
When transmission is complete, the unit exits the receive mode. You can select
receive more items. The receiving unit then displays a list of items received. Press y 5 to exit
the receive mode.
DuplicateName Menu
During transmission, if a variable name is duplicated, the
receiving unit.
DuplicateName
Prompts to rename receiving variable.
1: Rename
Overwrites data in receiving variable.
2: Overwrite
Skips transmission of sending variable.
3: Omit
Stops transmission at duplicate variable.
4: Quit
When you select
1:Rename
variable name, and then press Í. Transmission resumes.
When you select
2:Overwrite
receiving unit. Transmission resumes.
menu, press y 8 ~.
from the
LINK RECEIVE
, the prompt is displayed, and alpha-lock is on. Enter a new
Name=
, the sending unit's data overwrites the existing data stored on the
menu.
LINK SEND
menu.
LINK TRANSMIT
and begin transmitting.
1:Transmit
menu on the receiving unit, the message
menu is displayed on the
DuplicateName
Chapter 19: Communication Link
from the
1:Quit
again to
1:Receive
350