Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book page 149

DRAW Menu Text( Instruction
For the instruction:
Text(
• In mode,
Horiz row
• In mode, must be {45;
G-T row
Text(row,column,"text")
PRGM I/O Menu Output( Instruction
For the instruction:
Output(
• In mode,
Horiz row
• In mode, must be {8;
G-T row
Output(row,column,"text")
The instruction can only be used within a program.
Note: Output(
Setting a Split-Screen Mode from the Home Screen or a Program
To set or from a program, follow these steps.
Horiz G-T
1. Press z while the cursor is on a blank line in the program editor.
2. Select or
Horiz G-T
The instruction is pasted to the cursor location. The mode is set when the instruction is
encountered during program execution. It remains in effect after execution.
You also can paste
Note:
(Chapter 15).
must be {25; must be {94.
column
must be {46.
column
must be {4; must be {16.
column
must be {16.
column
.
or to the home screen or program editor from the CATALOG
Horiz G-T
Chapter 9: Split Screen 142