Texas Instruments TI-84 PLUS - Graphing Calculator Manual Book page 41

• If you select
1:Quit
• If you select
2:Goto
location.
If a syntax error occurs in the contents of a Y= function during program execution, then the
Note:
option returns to the Y= editor, not to the program.
Goto
Correcting an Error
To correct an error, follow these steps.
1. Note the error type (
2. Select , if it is available. The previous screen is displayed with the cursor at or near the
2:Goto
error location.
3. Determine the error. If you cannot recognize the error, refer to Appendix B.
4. Correct the expression.
(or press y 5 or '), then the home screen is displayed.
, then the previous screen is displayed with the cursor at or near the error
).
ERR:error type
Chapter 1: Operating the TI-84 Plus Silver Edition 34