Installing And Setting Up The Scanner; Step 1. Connecting The Scanner To Your Computer - Plustek OPTICARD 611 (BUSINESS CARD) Manual

If you don't find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your computer.

Installing and Setting up the Scanner

Please follow the step-by-step procedures described below to install the Plustek
scanner.
Step 1 . Connecting the Scanner to Your Computer
Step 1 . Connecting the Scanner to Your Computer
1. Connect the USB cable to your scanner.
2. Plug the USB cable into the USB port of your PC or notebook.
3. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the
USB hub.
Note: If you do not have a USB port available, you might need to buy a USB port.
3 The USB hub is not included with the scanner. If using a hub, you are recommended to use a
hub with its own external power adapter.
USB Connector(s)
7
3 , make sure that the hub is