Maintenance; Calibrating The Scanner - Plustek OPTICARD 611 (BUSINESS CARD) Manual

If the Windows system starts and detects the scanner unconnected, the following
message will appear to remind you:
Note: The scanner illustration(s) may appear different than from the actual
scanner itself.
If you prefer not to see this reminder message again, you may:
Check the box of [Do not show this message again] within this message
window, and then click [OK] button.
Click on the BCR Manager icon
Uncheck [Enable Warning] from the menu that pops up. Click the [No] button
in the message box that appears.
Attention

Maintenance

Calibrating the Scanner

Calibrating the Scanner
Calibrate your scanner when the following situations occur:
located on the Windows system tray.
If you would like to be prompted with this message again,
you may click on the BCR Manager icon
[Enable Warning] from the menu that pops up. Click the
[Yes] button in the message box that appears.
15
and check