Figure 47 NAT Mode
The following table describes the labels in this screen.
Table 33 NAT Mode
LABEL
None
SUA Only
Edit Details
Full Feature
Edit Details
Apply
10.5 Configuring SUA Server
If you do not assign an IP address in Server Set 1 (default server) the Prestige discards all
packets received for ports that are not specified here or in the remote management setup.
Click NAT, select SUA Only and click Edit Details to open the following screen.
Refer to
Table 32
Chapter 10 Network Address Translation (NAT) Screens
DESCRIPTION
Select this radio button to disable NAT.
Select this radio button if you have just one public WAN IP address for your Prestige.
The Prestige uses Address Mapping Set 1 in the NAT - Edit SUA/NAT Server Set
screen.
Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Select this radio button if you have multiple public WAN IP addresses for your Prestige.
Click this link to go to the NAT - Address Mapping Rules screen.
Click Apply to save your configuration.
for port numbers commonly used for particular services.
Prestige 662HW Series User's Guide
134