Accessing The Answering System - Uniden D3580-3 User Manual

To... Follow these steps:
1. Open the menu with the phone in standby. Select
switch
between
2. The system plays back the current greeting. Press
greetings
delete your Switch to your personal greeting, then press
greeting the greeting is playing.

Accessing the Answering System

When the phone's in standby, you can access the system from any handset through
the Play Message menu on the
♦ Only 1 handset can access the system at a time.
♦ If you do nothing for 30 seconds, the phone returns to
standby.
♦ During remote access, the phone beeps so you know
it's waiting for the next command.
During message playback, press
menu for playback control.
Play Message
Play Message replays all the messages received, starting
with the newest, unheard messages and then replaying the older messages. With the
phone in standby, press
play messages with this mode from the base or from the handset.
To...
play new
messages
restart this
message
replay an earlier
message
skip a message
Setup, then Greeting
switch greetings.
message/mute
menu/select
to access the
message/mute
From the base
Press
play/stop.
The system announces the number of new & old messages,
then plays each new message (followed by the day and time)
in the order it was received. After the new messages play, the
system plays the old messages.
Wait at least 5 seconds after the message starts playing,
press
rev/FlasH.
Within 2 seconds after a message starts playing,
press
rev/FlasH.
Press .
Fwd/mute
Options.
key. The following conditions apply:
to open the
Play Message
Answering
menu/select
intercom/clear
Select Play Message.
Play Message
Voicemail
selection. You can
From a handset
Press
message/mute
select Play Message.
press (number key).
1
select (number key).
1
Select (number key).
3
English - 21
to
while
and