Using The System While You're Away From Home - Uniden D3580-3 User Manual

To...
delete a
message
delete all
messages
play old
messages
stop playback
Screening Your Calls
You can use the answering system for call screening. While the system takes a
message, you can listen on the base speaker (if you turn on
handset. Only one handset can screen calls at a time. If another handset tries to
screen calls, it beeps and returns to standby.
To...
hear the caller leaving a
message
answer the call
mute the call screen
without answering*
* If you mute the call screen, the system continues taking the message: it just stops
playing through the speaker.

Using the System While You're Away from Home

You can dial in to your answering system from any touch-tone phone. Before you
can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Security Code. Use the number keypad to enter a two-digit security code
Press when you're finished.
menu/select
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system is turned
off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press 0 and immediately enter your security code.
If you enter it incorrectly 3 times, the system hangs up and returns to standby.
22 - English
From the base
While a message is playing, press
.
delete
With the phone in standby, press
; press
delete delete
After the system plays all new messages,
press again.
play/stop
Press .
play/stop
From the base
Listen to the caller over
the speaker.
NA
Press
play/stop
again to confirm.
.
Answering
From a handset
While a message is
playing, select (number
4
key).
Not available.
select (number key).
2
Select (number key).
5
Call Screen)
or from a
From a handset
Press
message/mute
Press .
Home/FlasH
Press or return the
end
handset to the cradle.
Setup, then select
(01
.
to 99).