Getting To Know Your Phone; Parts Of The Base - Uniden D3580-3 User Manual

D3580 series

Hide thumbs

Table Of Contents

Table of Contents

To test the connection

1. Pick up the handset from the cradle.

2. Dial the number you want to call, then press

hear a dial tone or ringing, but the handset display says Talk.

3. Make sure the call connects and you can hear clearly. (When you're finished,

press

to hang up.)

end

♦ The D3580 remembers the pairing information for your cellular; if it loses

connection with your phone for any reason (e.g., the cell phone travels out of

range, runs out of charge, etc.), the D3580 can automatically reconnect the

next time your phone becomes available.

Using the D3580 with four Bluetooth phones

♦ The D3580 can save the pairing information for four different Bluetooth phones,

but it can only use one cellular line at any given time. For example, if you pair the

D3580 to four Bluetooth phones, when you press

asks which phone you want to connect to.

♦ If you are using the D3580 to talk on one Bluetooth phone, the D3580 will not

ring if a call comes in on another phone.

♦ You can set a different ring tone for each paired cell phone (see page 8).

♦ To pair another Bluetooth phone, just repeat the pairing procedure with the new

phone. (If the paired phones interfere when you're pairing the new one, just turn

off Bluetooth on any paired phones until you finish pairing the new one.)