Personalizing The Greeting; Accessing The Answering System - Uniden DECT 2130 Owner's Manual

personalizing the greeting

Your personal outgoing message or greeting can be from 2 to 30 seconds
long. If you don't record a greeting, the system uses a pre-recorded
greeting: Hello, no one is available to take your call. Please leave a
message after the tone.
To...
Record a personal
greeting
Switch between
greetings
Delete your
greeting

accessing the answering system

When the phone's in standby, you can access the system from any
handset:
• Only 1 handset can access the system at a time.
• If you do nothing for 30 seconds, the phone returns to standby.
• You can press the number key shown next to each command instead of
scrolling through the screens.
Follow these steps:
1. Open the menu with the phone in standby. Select
Answering Setup, then Record Greeting.
2. Press MENU/SELECT to start recording. Wait
until the system says "Record greeting" before
speaking.
3. Press MENU/SELECT to stop recording. The
system plays back your new greeting.
4. To keep the greeting, press END. To re-record it,
press MENU/SELECT.
5. Open the menu with the phone in standby. Select
Answering Setup, then Greeting Options.
6. The system plays back the current greeting.
Press MENU/SELECT to switch greetings.
Switch to your personal greeting, press INTCOM/
CLEAR then "Delete Greeting?" is displayed. Select
"Yes" to clear greeting.
19