Uniden D3580-3 User Manual page 4

Setting Up the CellLink™ Bluetooth™ Connection
The new D3580 with CellLink technology can connect with mobile phones that
support the Bluetooth V2.1 handsfree profile.
♦ If you are not certain of the profiles supported by your Bluetooth phone or if you
have difficulty pairing your phone to the D3580, see the manual that came with
your phone.
♦ With the CellLink feature, you can essentially treat your cellular phone as a
second line. You can use the D3580 handset to make and receive calls on your
cellular phone number, put cellular calls on hold, and transfer calls to other
handsets. See page 11 for more information.
♦ Bluetooth wireless devices have a maximum range of about 33 feet (10 m); the
actual range will vary depending on local conditions (obstacles, battery power,
interference, etc.).
Pair your Bluetooth phone
Pairing "introduces" the Bluetooth device and D3580 and gives them permission
to connect to each other. In most cases, once you pair a phone to the D3580, these
two devices connect automatically whenever they detect each other. (If you have to
manually reconnect each time, check the Bluetooth settings on your cellular phone.)
You can pair your Bluetooth devices through the D3580 handset.
1. Press
menu/select
Bluetooth Setup
2. Select the
3. Select a cellphone to pair to from the list provided. (If your cellphone is not on
the list, select Add
displays Search & Select from Cellular D3580 PIN:
4. On your Bluetooth phone, start a search for other Bluetooth devices. (This
process may take several seconds and it will be different for each mobile phone.
See your phone owner's manual for detailed instructions.)
5. Your phone should discover a device called
your phone asks if you want to pair with this device, answer yes.
6. If your phone prompts you for a PIN code or password to pair with the D3580,
enter 0000 (four zeroes).
7. When your phone accepts the Bluetooth connection, the D3580 sounds a
confirmation tone and
number icon on the base and the handset display lights up. After 2 seconds, the
Select Cellular
screen displays again.
#
Most cell phones automatically transfer the audio to a Bluetooth device
as soon as it pairs; if yours does not, look in your cell phone's Bluetooth
setup for a "transfer audio" or "send audio to device" option.
4 - English
to display the handset's main menu.
menu; the
Cellular.) The base goes into pairing mode when the handset
Add Cellular Completed
Select Cellular
submenu displays.
0000.
D3580 or Handsfree
displays. The Bluetooth device
device. When