Enabling Encryption - HP 330834-B21 - StorageWorks Ultrium 460 Tape Library Drive Module User Manual

3. Select your combination of operating system and tape drive model in the table. A list of supported
backup applications is displayed. This will also tell you whether your configuration is compatible
with HP One-Button Disaster Recovery, HP OBDR. (All HP StorageWorks Ultrium tape drives
support HP OBDR. However, you can only use this feature if your system configuration and backup
application also support it. See "Compatibility" on page 53.)
4.
Make sure you have a backup application that supports HP StorageWorks Ultrium tape drives and
download any upgrades or patches, if required.

Enabling encryption

Your HP Ultrium 1840 tape drive includes hardware capable of performing data encryption while
writing and data decryption while reading, both at full speed. This is only possible with LTO-4 media.
See also refer to "Encryption" on page.
If you wish to make use of the encryption capability, you must enable this feature via the backup software
application. Refer to
advanced data protection capability.
20
Drivers and backup software
http://www.hp.com/go/connect to find out which applications support this