How Can I Check The Scsi Bus Type And Scsi Id; Supported Scsi Bus Types - HP 330834-B21 - StorageWorks Ultrium 460 Tape Library Drive Module User Manual

Table 2 Supported SCSI bus types
SCSI Bus Type
Ultra320 LVD
Ultra160 LVD
Ultra2 LVD
Ultra wide
LVD and
single-ended
Ultra narrow,
single-ended
High Voltage
Differential

How can I check the SCSI bus type and SCSI ID?

For many operating systems, you can install and run HP Library & Tape Tools from either the
HP StorageWorks Tape CD-ROM or
current SCSI configuration (see also
bus and the SCSI IDs in use.
Supported
Yes. This is a recommended configuration for all Ultrium full-height tape drives.
Do not daisy chain Ultrium 1840 or Ultrium 960 tape drives because performance
will be degraded. Up to two Ultrium 460 tape drives may be daisy-chained.
Yes. This is a recommended configuration for Ultrium 460 tape drives. It is an
acceptable configuration for Ultrium 960 and 1840 tape drives.
Up to two Ultrium 460 tape drives may be daisy-chained. Do not daisy-chain Ultrium
1840 and Ultrium 960 tape drives.
Yes. This is acceptable for one Ultrium 460 drive per bus, but performance may
be impaired.
Do not use with Ultrium 1840 or 960 tape drives and do not daisy-chain Ultrium
460 tape drives.
These are not recommended configurations as they will restrict performance.
No. This will severely restrict performance and you will need a suitable cable or
adapter.
No. The drive will not work and you may damage the drive or controller
http://www.hp.com/support/tapetools
Diagnostic tools ). This will provide information about the SCSI
Ultrium full-height SCSI Tape Drives
to check your server's
15