Table of Contents
Advertisement
PERSISTENT RESERVE IN
Table 6-49: PERSISTENT RESERVATION IN parameter data for READ KEYS
Bit
7
Byte
0
(MSB)
3
4
(MSB)
7
8
(MSB)
15
n-7
(MSB)
n
GENERATION: This field shall contain a 32-bit counter maintained by the drive that shall be incremented every time
a PERSISTENT RESERVE OUT command requests a REGISTER, a CLEAR, a PREEMPT, or a PREEMPT AND
ABORT service action. The counter shall not be incremented by a PERSISTENT RESERVE IN command, by a
PERSISTENT RESERVE OUT command that performs a RESERVE or RELEASE service action, or by a
PERSISTENT RESERVE OUT command that is not performed due to an error or reservation conflict. The
generation value shall be set to 0 as part of the power on reset process.
Additional Length: This filed contains a counter of the number of bytes in the Reservation key list. If the allocation
length specified by the PERSISTENT RESERVE IN command is not sufficient to contain the entire parameter list,
then only the bytes from 0 to the maximum allowed allocation length shall be sent to the application client. The
incremental remaining bytes shall be truncated, although the Additional Length field shall still contain the actual
number of bytes in the reservation key list without consideration of any truncation resulting from an insufficient
allocation length. This shall not be considered an error.
Reservation Key: The reservation key list contains the 8-byte reservation keys for all initiators that have registered
through all ports with drive.
The returned the parameter data provided in response to a PERSISTENT RESERVE IN command with the READ
RESERVATION service action has the following format:
Table 6-50: PERSISTENT RESERVATION IN parameter data for READ RESERVATION
Bit
7
Byte
0
(MSB)
3
4
(MSB)
7
8
(MSB)
23
GENERATION: This field shall be defined for the PERSISTENT RESERVE IN READ KEYS parameter data.
Additional Length: This filed contains a counter of the number of bytes to follow in Reservation descriptor. If the
allocation length specified by the PERSISTENT RESERVE IN command is not sufficient to contain the entire
parameter list, then only the bytes from 0 to the maximum allowed allocation length shall be sent to the application
client. The incremental remaining bytes shall be truncated, although the Additional Length field shall still contain the
actual number of bytes of Reservation descriptor and shall not be affected by the truncation. This shall not be
considered an error.
SONY AIT-E Turbo drive SDX-250V series Ver.1.0
6
5
GENERATION
Additional Length
Reservation Key list
First reservation key
Last reservation key
6
5
GENERATION
Additional Length
Reservation descriptor
4
3
2
4
3
2
6.Command Specification
1
0
(LSB)
(LSB)
(LSB)
(LSB)
1
0
(LSB)
(LSB)
(LSB)
6-45
Advertisement
Table of Contents
