Table of Contents
Advertisement
WRITE
The buffer can be maintained through the following media commands, assuming that no other flush condition has
been met, for example, write hold-off time-out.
WRITE
WRITE FILE MARKS with Immediate bit set
ERASE
Buffered Mode not selected. This causes the buffer to flush after every write type command. Buffered Mode
2.
can be configured through MODE SELECT and if NOT used, will cause the drive will suffer a significant
degradation in performance with respect to capacity, transfer rate and, loss of streaming.
The write hold-off time limit is exceeded. The default value is 10 seconds.
3.
SONY AIT-E Turbo drive SDX-250V series Ver.1.0
6.Command Specification
6-85
Advertisement
Table of Contents
