Reference; How To Get Ecma-222 Standard Document - Freecom TAPEWARE AIT-250I Specification

1.Introduction
• Large 12 MB Buffer Memory
• 3.5" Standard Height, 5.25" Half Height
• Embedded SCSI interface (Ultra/WIDE, Single-ended or Low Voltage differential)
• Supports Variable or Fixed record length
• Supports SCSI Disconnection/Arbitration
• Read After Write (RAW) On and Off capability
• Read Retry On and Off capability
• Frame rewrite function
• Three levels of Error Correction Code (ECC)
• High Speed search (120 times nominal Read/Write speed)
• Random read, Append write
• Repeat Write option

1.4. Reference

Please refer to the following documents for additional information:
• SCSI-2 ANSI X3.131.-1996 Small Computer Systems Interface-2 (SCSI-2).
1
• SCSI Parallel Interface-2 (SPI-2) ANSI X3T10-1142D rev 20b.
ANSI X3T9.2/86-109 (Revision 10H, or above), available through ANSI.
• ALDC - Adaptive Lossless Data Compression (ALDC) Algorithm;
ECMA-222, available through

How to get ECMA-222 Standard Document

1.4.1.
You can get these ECMA Standard Document file from the following URL.
http://www.ecma-international.org/publications/standards/standard.html
1
ANSI (American National Standard for Industry)
2
ECMA (European Computer Manufacturers Association)
1-2
ECMA.
2
SONY AIT-E Turbo drive SDX-250V series Ver.1.0