Performance Specification; Data Capacity - Freecom TAPEWARE AIT-250I Specification

2.Specification
10 10

2.3. Performance Specification

The data capacity, data transfer rate and data reliability specifications this chapter require the media to conform to
the AIT-E Turbo Media Specification and also require the drive and media to remain within their respective operating
and non-operating environmental specifications. The specifications below also assume that the C3 ECC frame is
generated on writing and used as necessary on reading, and further assumes that read-after-write rewrites are used
as necessary on writing.

Data Capacity

2.3.1.
The SDX-250V includes a data compression capability. When data compression is enabled the drive capacity can
increase from 2 times to 3 times. The efficiency of the data compression depends on the actual data that is being
compressed and cannot be predicted precisely prior to compression.
Format AIT-E Turbo Standard Format
Native
20.0 Gbyte typical
Capacity
2-6
10
Figure 2-4: Mounting Attitude and Tolerance
When using 98 meter tape AIT-E Turbo cassette (TAITE-20N)
10
SONY AIT-E Turbo drive SDX-250V series Ver.1.0
10 10
10
10