Set Password; Select Country - Zenith HDV420 Installation And Operating Manual, Warranty

LOCK Settings (Continued)
24

Set Password

Lets you change the password.
Follow Steps 1-2 as shown for the Lock System on page 23.
1 1
Use 3 3 /4 4 to select the Set Password option.
2 2
Press 2 2 or (SELECT) to move to the third level.
3 3
Enter the new 4-digit code.
4 4
Enter exactly the same code a second time.
5 5
Press MENU to return to the previous screen or press EXIT on the
6 6
remote control to return to TV viewing.

Select Country

Selects a country (USA or Canada) whose standards were used to rate the
broadcast.
Follow Steps 1-2 as shown for the Lock System on page 23.
1 1
Use 3 3 /4 4 to select the Select Country option.
2 2
Press 2 2 or (SELECT) to move to the third level.
3 3
Use 3 3 /4 4 to select a country (USA or Canada) then press
4 4
(SELECT) to confirm your selection.
Press MENU to return to the previous screen or press EXIT on the
5 5
remote control to return to TV viewing.