Menu Operation - Zenith HDV420 Installation And Operating Manual, Warranty

Menu Operation

Initial Settings
In this menu system, there are several ways to customize the settings pro-
vided. Most menus consist of three levels to set up the options, but some
require greater depth for the variety of settings. If you press the MENU but-
ton, only the first level of the menu system will appear on the TV screen. The
second and third level can be displayed by pressing
has more than three levels, the pop-up dialogue box will be displayed as the
fourth or fifth level. For navigating the menu levels, you will see " " or " 2 2 "
on the right side of the menu label to help you go to the next level.
To bring up and exit the Menu:
Press the MENU button on the remote control to bring up the menu. A sec-
ond press of the MENU button or a press of the EXIT button will take you
back to TV viewing.
To go to the next level:
Press " " or " 2 2 " on the remote control.
To go back to the previous level:
Press " 1 1 " on the remote control.
Initial Settings General Operation
Press MENU.
1 1
The main menu appears.
Use 3 3 /4 4 to select the desired item.
2 2
While the desired item is selected, press 2 2 or
3 3
to the second level.
Use 3 3 /4 4 to select the second desired item.
4 4
Press 2 2 or (SELECT) to move to the third level.
5 5
Some items require additional steps.
Press (SELECT) to confirm your selection.
6 6
Press MENU to exit the setup menu.
7 7
(SELECT). If a menu
(SELECT) to move
15