Visioneer Strobe XP 470 User Manual page 44

The settings on the Properties window are:
Select Destination—The list of applications that can open to display
the scanned image for the selected button. To configure the list of
available applications, click the Options tab at the top of the dialog box
and select the desired options. See "Selecting Options for a Button" on
page 55 for more information.
Select Configuration—The list of available scan configurations for the
selected button. The configuration settings include: scanning mode,
resolution (dpi), page size, brightness, color saturation, hue, and
gamma. To see a selected scan configuration's settings, click its icon.
Click the icon again to close the detailed information.
Click the icon of a selected
configuration
to view its settings.
The icons next to each scan configuration indicate the scanning mode.
Color Black and White
Note: Use Configure Before Scan if you want to set the scanning
mode manually before scanning. See "Configuring Before Scanning"
on page 68.
You can also click the Edit button or double click the configuration to
see more detailed information about the selected configuration.
C O
ONFIGURING THE
Grayscale Configure
Before Scan
T B 37
NE OUCH UTTONS