Gigabyte C7V7-CSI User Manual page 31

Select Display Device
[CRT] [LCD] [TV] [DVI] [HDTV] [CRT+LCD] [CRT+TV] [CRT+DVI] [CRT+HDTV] [DVI+HDTV]
[LCD+DVI] [TV+DVI].(Default value:CRT)
Panel Type
Disabled
Enabled
Outport Port
DIO
DI1
Dithering
Disabled
Enabled
TV-Layout
[Default] [COMP.+S-Video] [S-Video+S-Video] [COMP.+R/G/B] [COMP.+Y/Cb/Cr]
[COMP.+SDTV-R,G,B] [COMP.+SDTV-Y, Pb, Pr] [COMPOSITE] [S-Video] [R,G,B]
[Y,Cb,Cr] [SDTV-R,G,B] [SDTV-Y,Pb,Pr] [S-Video+R,G,B] [S-Video+Y,Cb,Cr].
(Default value: Default)
TV-type
[NTSC] [PAL/PAL B/PAL G/PAL H] [PALM] [PALN] [PALNc] [PALI] [PALD] [NTSC Japan]
(Default value: NTSC)
TV-connector
[CVBS] [S-Video 0] [R/G/B] [Cr/Y/Cb] [SDTV-R/G/B] [SDTV-Pr/Y/Pb] [S-Video 1]
(Default value: CVBS)
PCI Master 0 WS Write
Disabled Disabled PCI Master 0 WS write.
Enabled Enabled PCI Master 0 WS write.(Default value)
PCI Delay transaction
Disabled Disabled PCI delay transaction.
Enabled Enabled PCI delay transaction.(Default value)
VLink mode seclection
By Auto VLink mode selection by automatically. (Default value)
Mode 0 Set VLink mode to mode 0.
Mode 1 Set VLink mode to mode 1.
VLink 8x Support
Disabled Disabled VLink 8x support.
Enabled Enabled VLink 8x support.(Default value)
Disabled panel type.
Panel Type [Key in a HEX number].
Set outport port to DIO. (Default value)
Set outport port to DI1.
Disabled this function.(Default value)
Enabled this function.
- 31 - BIOS Setup