Table of Contents
Advertisement
Modem Use IRQ
NA
Set Modem use IRQ to NA. (Default value)
3
Set Modem use IRQ to 3.
4
Set Modem use IRQ to 4.
5
Set Modem use IRQ to 5.
7
Set Modem use IRQ to 7.
9
Set Modem use IRQ to 9.
10
Set Modem use IRQ to 10.
11
Set Modem use IRQ to 11.
Soft-Off by Power button
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec
Press power button 4 seconds to Power off. Enter suspend if button is
pressed less than 4 seconds.
Run VGA BIOS if S3 Resume
Auto
Set run VGA BIOS if S3 resume automatically. (Default value)
Yes
Enabled run VGA BIOS if S3 resume.
No
Disabled this function.
AC Loss Auto Restart
Off
Disabled this function. (Default value)
On
Set AC Loss auto restart.
Former-Sts
Set AC Loss to former-Sts.
PS2KB Wakeup Select
Hot Key
Set Hot key to wakeup PS/2 Keyboard.
PS2KB Wakeup from S3/S4/S5
Disabled
Disabled this function.(Default value)
Ctrl+F1~Ctrl+F12
Set PS/2 keyboard wakeup from S3/S4/S5 to Ctrl+F1~Ctrl+F12.
Power
Press power key to wake PS/2 keyboard from S3/S4/S5.
Wake
Any Key
Press any key to wake PS/2 keyboard from S3/S4/S5.
PS2MS Wakeup from S3/S4/S5
Disabled
Disabled this function.(Default value)
Enabled
Enabled PS2 mouse wakeup from S3/S4/S5.
USB Resume from S3
Disabled
Disabled this function.(Default value)
Enabled
Enabled USB Resume from S3.
VGA
ON
Set VGA to ON.
OFF
Set VGA to OFF.(Default value)
LPT&COM
LPT/COM
Monitor LPT/COM for Green event.(Default value)
NONE
Disabled this function.
COM
Monitor COM for Green event
LPT
Monitor LPT for Green event
- 39 -
BIOS Setup
Advertisement
Table of Contents
