Wireless Status; Usb Settings; Usb Mass Storage - TP-Link TD-W8968 User Manual

TD-W8968

4.6.6 Wireless Status

Choose menu "Wireless" "Wireless Status", you can see the MAC Address, Current Status,
Received Packets and Sent Packets for each connected wireless station.
MAC Address: The connected wireless station's MAC address
Current Status: The connected wireless station's running status, one of
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected
Received Packets: Packets received by the station
Sent Packets: Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.

4.7 USB Settings

There are six submenus under the USB Settings menu, USB Mass Storage, User Accounts,
Storage Sharing, FTP Server, Media Server and Print Server. Click any of them, and you will be
able to configure the corresponding function.

4.7.1 USB Mass Storage

Choose menu "USB Settings → "USB Mass Storage", you can configure a USB disk drive
attached to the Modem Router and view volume and share properties such as share name,
capacity, status, and action, etc on this page as shown below.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-34
50
STA-AUTH/